Stainless Steel Plate | |
Grade | 304/304L, 316/316L & 4003/3CR12. |
Thickness (mm) | 5.0 to 50.0. |
Width (mm) | 1250 (grade 4003), 1500 & 2000. |
Length (mm) | 3000, 6000 & customer specific cut-to-length. |
Finish | 2B (to 8mm) & No.1 (HRAP). |
Plasma profiles | To customer drawings. |
The information provided is for standard stock product and does not encapsulate all available combinations. Please contact your nearest Atlas Steels Service Centre if non standard product is required and we will enquire about its availability through our global supply network of mills and stockists.
For more technical information there are excellent reference manuals and data sheets contained within the technical library of this website.
Stainless steel coil plate – ASTM A240M
The most efficient route for a stainless steel production mill to produce plate (5mm and over) is in coil form. The coil is then further downstream processed by the mill or through a service centre with equipment to flatten (often called ‘levelling’) and cut to length.
The maximum plate width produced by mills from coil is 2000mm and the maximum thickness is 13mm for hot rolled and 8mm for cold rolled.
Grade | Thickness (mm) | Coil width (mm) | Finish |
304/304L | 5.0 | 1500 | 2B |
316/316L | 6.0 | 2000 | No. 1 |
304/304L | 8.0 | 1500 | No. 1 |
316/316L | 10.0 | 2000 | |
12.0 | |||
3CR12 | 5.0 | 1250 | No. 1 |
Stainless steel quarto plate products – ASTM A240M
Another method of producing stainless steel plate within and beyond the thickness range of coil production is from a slab of steel that is rolled in the flat condition to a specified length, width and thickness. The product of this process is commonly referred to as quarto plate and is available from mills in thickness from 5mm and above and widths to 4000mm in some thicknesses.
The standard grades and thickness for quarto plate are as follows:
Grades | 304/304L, 316/316L, 3CR12. |
Thickness (mm) | 5.0, 6.0, 8.0, 10.0, 12.0, 16.0 & 20.0. |
Width (mm) | 1500 & 2000. |
Length (mm) | 6000. |
Finish | No. 1 (HRAP). |
Quarto plate is commonly stocked as a dual certified grade, i.e. 304/304L and 316/316L.
Stainless steel chequer (floor) plate
Grades | 304. |
Thickness (mm) | 3.18 & 4.76 . |
Width (mm) | 1219 & 1250. |
Length (mm) | 2438. |
CLIENT RESOURCES
PRODUCT
MANUAL
PREN
CALCULATOR
CE
CALCULATOR
PRODUCT WEIGHT
CALCULATOR
TECHNICAL
LIBRARY
CONTACT US | 8 SERVICE CENTRES ACROSS AUSTRALIA
LAUNCESTON
Contact Us
SHEPPARTON
LAUNCESTON
COPYRIGHT
© Copyright 2021
Atlas Steels
CONTACT US
Phone: 1800 4ATLAS
or: 1800 428527